Find Password of wifi using cmd (Admin mode)
netsh wlan show profile name=labnol key=clear
Change Name = “Your wifi Name”
netsh wlan show profile
NETSH WLAN show drivers
netsh wlan set hostednetwork mode=allow ssid=NETWORKNAME key=PASSWORD
find Network Connected device
netsh int ip reset
One common way of using netsh is to reset the TCP/IP in Windows 2k/XP
Net View for All Computer
Press “Enter” to view the IP address of printers and other devices connected to the network.
Ipconfig is a Console Command which can be issued to the Command Line Interpreter (or command prompt) to display the
network settings currently assigned to any or all network adapters in the machine. This command can be utilised to verify
a network connection as well as to verify your network settings.
Displays active TCP connections, ports on which the computer is listening, Ethernet statistics, the IP routing table,
IPv4 statistics (for the IP, ICMP, TCP, and UDP protocols), and IPv6 statistics (for the IPv6, ICMPv6, TCP over IPv6,
and UDP over IPv6 protocols). Used without parameters, netstat displays active TCP connections
The tracert command is used to visually see a network packet being sent and received and the amount of hops
required for that packet to get to its destination.
Helps in determining TCP/IP Networks IP address as well as determine issues with the network and assists
in resolving them.
Provides information about network latency and network loss at intermediate hops between a source and destination.
Pathping sends multiple Echo Request messages to each router between a source and destination over a period of time
and then computes results based on the packets returned from each router.
Telnet is software that allows users to remotely access another computer such as a server, network device, or other
computer. With telnet users can connect to a device or computer, manage a network device, setup a device, transfer